How To Flash (Unbrick) your MediaTek device by installing Stock ROM through SP Flash Tool

This Tutorial is to guide you how to Install Official Stock Rom in any Mediatek Android Device OR How to get your Bricked phone back to normal working condition. Sometimes due to installation of custom rom that are not meant for your device your phone you often end up bricking your device i.e Your phone doesn't starts and even charge which ultimately is a brick or Boot Loop in which it keeps restarting but you can get back to normal easily by restoring your data for flashing rom through CWM but sometimes you can't even goto recovery mode so This isn't the end of your phone. Today i'm posting this about how to unbrick your phone, you can even use this method to install stock rom .Keywords : How to Get your Dead phone back to working condition, How to use Smart Phone (SP) Flash tool, How to unbrick mediatek phones.

Note: Do not flash firmware which are not meant for your device , or else your phone will be completely dead . Even SP Flash tool will not detect your phone. So Check carefully the name of zip file.

Don't Forget to checkout :

Download Latest SmartPhone Flash Tool 5.1352 : (Download from anyone link)

Steps :

Step 1 : First Download Official “Stock ROM / Firmware” From here.

Step 2 : Download USB Drivers i.e ADB Drivers which works for all Android device.

Link 1 : ADB Drivers 1.4.2.
Link 2 : ADB Drivers 1.4.2.
Link 3 : ADB Drivers 1.4.2.

Step 3 : Install the download file. Don't forget to connect your device by enabling USB Debugging mode (Goto Phone Setting > Developer Options > Enable USB Debugging mode.)

Step 4 : Now Power Off your device & remove the battery only if it's removable.

Step 5 : Extract “ '***".zip i.e Stock ROM (** Indicated the file name)

Step 6 : Run Flash_Tool.exe

You will see something like this .

Step 7 : Select DA Please make sure the Download Agent has been assigned.

Step 8 : Select scatter file. Please make sure you select the correct scatter file that you found in the ROM zip.

Step 9 : Select Download Scene Select the expected Download Scene before download.

a. MOTA SIU like (Recommended) :

Function :
Only Boot.img,Recovery.img & Android will be updated, format->Download.

b. Format All + Download :

Function :
Format Whole Flash and download all images.

c. Firmware Upgrade :

Function:
Aim to protect important data from to be lost.

d. Custom :

Function:

Image files to be updated (format -> download) can be customized in this scene, that is, partial download is allowed.

Step 10 : Start Download i.e to Begin the Installing Process by clicking on the Download button at the top.

Step 11 : Now Power On your device if it doesn't gets on Automatically to begin the downloading process.

Download Process Indications :

Connections :

Readback :

Format :

Download :

If you still need any help or getting problem during installation, then don’t hesitate to ask . Let me know your queries & feedback about this post in the comment section. If you find any error like device not detected them Installed VCOM drivers of Mtk65xx you can find it on XDA. If you found this post helpful then don't forget to share this post with other Android users so that they could get their dead phones working in few easy steps without paying few dollars on it.